过渡金属Co2+离子掺杂ZnS硫化物纳米晶制备与中红外发光特性研究

利用不含有机相的简单水热法制备了Co^2+∶ZnS纳米晶,纳米晶具有立方闪锌矿结构,平均晶粒尺寸约为8.3 nm,在808 nm激光泵浦下具有2~5μm波段的中红外荧光发射,中心波长位于3400 nm和4700 nm,分别对应Co^2+离子的4T2(F)→4 A 1(F)和4T1(F)→4T2(F)的能级跃迁.进一步将制备的纳米晶在还原气氛下进行800℃热处理,获得立方闪锌矿和纤锌矿混合晶型的纳米晶,平均晶粒尺寸增大到22.5 nm左右,热处理后的纳米晶表面羟基含量更低,中红外荧光发射强度显著提高.该Co^2+∶ZnS纳米晶的制备方法简单、在制备过程中不引入有机相等荧光淬灭中心,同时证明通过后热处理过程可以进一步减少表面缺陷及羟基含量,使荧光强度得到大幅提升.     

Rapid analysis of ultraviolet filters using dispersive liquid–liquid microextraction coupled to headspace gas chromatography and mass spectrometry

An ionic‐liquid‐based in situ dispersive liquid–liquid microextraction method coupled to headspace gas chromatography and mass spectrometry was developed for the rapid analysis of ultraviolet filters. The chemical structures of five ionic liquids were specifically designed to incorporate various functional groups for the favorable extraction of the target analytes. Extraction parameters including ionic liquid mass, molar ratio of ionic liquid to metathesis reagent, vortex time, ionic strength, pH, and total sample volume were studied and optimized. The effect of the headspace temperature and volume during the headspace sampling step was also evaluated to increase the sensitivity of the method. The optimized procedure is fast as it only required ∼7–10 min per extraction and allowed for multiple extractions to be performed simultaneously. In addition, the method exhibited high precision, good linearity, and low limits of detection for six ultraviolet filters in aqueous samples. The developed method was applied to both pool and lake water samples attaining acceptable relative recovery values.     

Study of blood collection and sample preparation for analysis of vitamin D and its metabolites by liquid chromatography–tandem mass spectrometry

The analysis of vitamin D status, with special emphasis on 25-hydroxyvitamin D and 1,25-dihydroxyvitamin D, is gaining interest in clinical studies due to the classical and non-classical effects attributed to this prohormone. In this research, the influence of the two steps preceding determination (viz. sample collection and preparation) on the quantitative analysis of vitamin D and its more important metabolites has been studied. Two preparation approaches, deproteination and solid-phase extraction (SPE), have been evaluated in terms of sensitivity to delimit their application, thus establishing that detection of 1,25-dihydroxyvitamin D cannot be addressed by protein precipitation. Concerning sample collection, serum and plasma reported high accuracy (above 83.3%) for vitamin D and metabolites, while precision, expressed as relative standard deviation, was below 12.9% for all analytes in both samples. Statistical analysis revealed that serum and plasma provided similar physiological levels for vitamin D₃, 24,25-dihydroxyvitamin D₃ and 25-hydroxyvitamin D₃, while significantly different levels were obtained for 1,25-dihydroxyvitamin D₃, always higher in plasma than in serum. Sample collection and treatment have proved to be significant in the analysis of vitamin D and its relevant metabolites.     

Simple and Precise Quantification of Iron Catalyst Content in Carbon Nanotubes Using UV/Visible Spectroscopy

Iron catalysts have been used widely for the mass production of carbon nanotubes (CNTs) with high yield. In this study, UV/visible spectroscopy was used to determine the Fe catalyst content in CNTs using a colorimetric technique. Fe ions in solution form red–orange complexes with 1,10-phenanthroline, producing an absorption peak at λ=510 nm, the intensity of which is proportional to the solution Fe concentration. A series of standard Fe solutions were formulated to establish the relationship between optical absorbance and Fe concentration. Many Fe catalysts were microscopically observed to be encased by graphitic layers, thus preventing their extraction. Fe catalyst dissolution from CNTs was investigated with various single and mixed acids, and Fe concentration was found to be highest with CNTs being held at reflux in HClO₄/HNO₃ and H₂SO₄/HNO₃ mixtures. This novel colorimetric method to measure Fe concentrations by UV/Vis spectroscopy was validated by inductively coupled plasma optical emission spectroscopy, indicating its reliability and applicability to asses Fe content in CNTs.     

Characterization of a Novel Intrinsic Luminescent Room‐Temperature Ionic Liquid Based on [P6,6,6,14][ANS]

Intrinsically luminescent room‐temperature ionic liquids (RTILs) can be prepared by combining a luminescent anion (more common) or cation with appropriate counter ions, rendering new luminescent soft materials. These RTILs are still new, and many of their photochemical properties are not well known. A novel intrinsic luminescent RTIL based on the 8‐anilinonaphthalene‐1‐sulfonate ([ANS]) anion combined with the trihexyltetradecylphosphonium ([P_6,6,6,14]) cation was prepared and characterized by spectroscopic techniques. Detailed photophysical studies highlight the influence of the ionic liquid environment on the ANS fluorescence, which together with rheological and ¹H NMR experiments illustrate the effects of both the viscosity and electrostatic interactions between the ions. This material is liquid at room temperature and possesses a glass transition temperature (T_g) of 230.4 K. The fluorescence is not highly sensitive to factors such as temperature, but owing to its high viscosity, dynamic Stokes shift measurements reveal very slow components for the IL relaxation.     

Reflectance and ultraviolet spectroscopy: predicting the relative growth of Saccharomyces cerevisiae in pine biomass

Ultrasound treatment favors enzymatic attack on vegetal materials and influences biological activity. The objective of this study was to develop substrates for Saccharomyces cerevisiae based on the hydrothermal treatment and ultrasound treatment of pine needle biomass. The samples subjected to ultrasound treatment at 550?°C and 650?°C showed higher reflectance bands at around 200?nm after 80?min of ultrasound treatment and lower band gap energies associated with lower IC₃₀ values. The hydrothermal treatment with 100?min of ultrasound treatment generated more promising materials for the use of the substrates with the eukaryotic model S. cerevisiae.     

Fabrication and characterization of cellulose nanoparticles from maize stalk pith via ultrasonic-mediated cationic etherification

In this study, parenchyma cellulose, which was extracted from maize stalk pith as an abundant source of agricultural residues, was applied for preparing cellulose nanoparticles (CNPs) via an ultrasound-assisted etherification and a subsequent sonication process. The ultrasonic-assisted treatment greatly improved the modification of the pith cellulose with glycidyltrimethylammonium chloride, leading to a partial increase in the dissolubility of the as-obtained product and thus disintegration of sheet-like cellulose into nanoparticles. While the formation of CNPs by ultrasonication was largely dependent on the cellulose consistency in the cationic-modified system. Under the condition of 25% cellulose consistency, the longer sono-treated duration yielded a more stable and dispersible suspension of CNP due to its higher zeta potential. Degree of substitution and FT-IR analyses indicated that quaternary ammonium salts were grafted onto hydroxyl groups of cellulose chain. SEM and TEM images exhibited the CNP to have spherical morphology with an average dimeter from 15 to 55 nm. XRD investigation revealed that CNPs consisted mainly of a crystalline cellulose Ι structure, and they had a lower crystallinity than the starting cellulose. Moreover, thermogravimetric results illustrated the thermal resistance of the CNPs was lower than the pith cellulose. The optimal CNP with highly cationic charges, good stability and acceptable thermostability might be considered as one of the alternatively renewable reinforcement additives for nanocomposite production.     

Influence of ultrasound on the functional characteristics of indigenous varieties of mango (Mangifera indica L.)

The present study was conducted to evaluate the effect of ultrasonic (US) treatment on chemical characteristics and antioxidant potential of pulps obtained from eight mango varieties indigenous to Pakistan. There was a significant (p < 0.05) effect of varieties and US treatment on chemical characteristics i.e. pH, acidity, TSS, vitamin C contents, total sugars (%), reducing sugars (%) and non-reducing sugars (%). Microstructure evaluation of pulp from all mango varieties showed deshaped middle lamella and cell wall of cells after 8 min of US treatment. At 4 min of US treatment as per shaped cell wall and middle lamella, the chemical characteristics and antioxidant potential were higher. The total phenolics (TP), flavonoids (TF) and total antioxidant activity (TAA) of pulp from most varieties increased significantly (p < 0.05) after US treatment for 4 min but decreased successively after each treatment i.e. 8 and 12 min. The maximum value (314.17 μg AAE/mL pulp) of DPPH was shown by pulp from Dosehri and the minimum (158.67 μg AAE/mL pulp) was found in pulp from Langra before US treatment. The DPPH values of pulp from most of the varieties increased significantly (p < 0.05) after US treatment for 4 min but decreased successively after each treatment but pulp from Langra showed increasing trend after 8 min of US treatment which decreased after 12 min of treatment. The total anthocyanin (TA) values of pulp from Chaunsa, Dosehri, Sindhri, Gulab Khas and Langra increased abruptly after US treatment for 4 min but decreased successively after subsequent treatment. The pulp from Desi, Anwar Ratol, Gulab Khas and Langra showed an abrupt decrease in TA after 8 min of US treatment. An increasing trend of values of total carotenoids (TC) was shown by pulp from all mango varieties after 4 min of US treatment but decreasing trend was observed with subsequent increase in time of US treatment.     

Changes of microflora in high pressure treated Indian white prawn (Fenneropenaeus indicus)

ABSTRACT

This study was to investigate the piezotolerance and diversity indices of microflora of Indian white prawn (Fenneropenaeus indicus) after high pressure (HP)-treatment. Indian white prawns subjected to HP-treatments and its effect was studied up to species level and compared with unpressurized samples. The bacterium was identified by using bacterial identification schemes, biochemical tests and API kits (bioMérieux, Marcyl’Etoile, France). Diversity analysis was performed using PRIMER (Plymouth Routines in Multivariate Research) software v 5.2.2. The significant elimination of microflora was found to be proportional with the pressure level. In the case of spore formers, mere destruction was noticed after HP-treatment. Arthrobacter spp., Listeria grayi and Corynebacterium spp. were the most piezotolerant bacteria in HP-treated samples. Diversity indices revealed a significant reduction of microflora of Indian white prawn. The apparent reduction of microflora with pressure level was clearly evident from the diversity indices; moreover a diminished piezotolerance of Gram negative spoilage bacteria was also observed.